Quantcast

How to Resize Watchband

Change
the size of a watchband is a fairly simple task. The ability to change
the size of a watch band can give your watch a perfect fit. Basically,
you just push out the pins that hold the extra links, remove the links,
adjust the band to the correct size and then reinsert the pins. Despite
all this, owners of expensive or delicate
fake cartier prefer to take it to a professional watchmaker.



Resizing a Band With an Adjustable Clasp



For watches
featuring spring-bar clasps set in notches, adjust the size by moving
the spring bar to a different set of notches. Stick a straightened
paperclip through the outside edge of the notch and depress the end of
the spring bar. Slide the bar with the attached watchband out of the
notches, then replace one end of the bar into a different notch.
Depress the opposite end of the spring bar and slide it into the
matching notch on the other side of the clasp.




Resizing a Stretch Band With Links



For stretch-band omega watches ,
turn the band inside out. Holding the band taut in one hand, wedge the
tip of a small, flat screwdriver into one of the side flaps of an
interior link and pry it up. Use caution to avoid accidentally stabbing
your fingers. Repeat with the flap on the other side of the link, then
pry up the two center flaps and remove the link entirely. Remove as
many links as needed to correctly resize the watchband, then reconnect
the two ends of the watchband by reattaching the bottom link and
closing all the flaps.




Resizing a Watchband Fastened With Pins or Screw Pins



Find the pins on the sides of the watchband holding the links in place.fake watches A small arrow stamped on each link will indicate the direction to push the pins to remove them breitling.
Place a pin removal tool or a sturdy pin with a broken point against
the tip of the pin and push in the direction of the arrow. It will
require a bit of force to remove the pin
omega watch .
Push out a second pin at the end of the section to be removed.
Reassemble the watchband and replace the pin by pushing it back in the
opposite direction of the arrow.


You!
Add Photos & Videos

Opinions

Leave a comment and start the discussion!

About Me

qwer

qwer

United States

2010/01/05 05:22:45

View complete profile

Hot Questions on SodaHead
More Hot Questions

More Community More Originals